|
|
 |
DIRECTIONS FOR AUTOMOTIVE, MOTORCYCLE
AND TWO-CYCLE APPLICATION OF MILITEC-1
Gasoline, Diesel and Propane Engines: Add 250ml for a 4 to 6 litre engine oil crank case capacity every 25,000 km. For larger engines, add 60ml per litre engine oil every 25,000 km. Change oil at the manufacturer’s recommended oil change intervals.
Transmissions (Manual or Automatic): Add 120ml every 50,000 km.
Transfer Case: Add 120ml every 50,000 km.
Differentials: Add 60ml every 50,000 km.
Power Steering: Add 30ml every 50,000 km.
Air Conditioner: Add 15ml when charging with refrigerant.
Wheel Bearings: Coat metal surface with MILITEC-1 before packing with grease containing 10% to 15% MILITEC-1 or use MILITEC-1 Grease.
Motorcycle: Common sumps, add 30ml per each litre of oil in sump.
Two-Cycle: Add 60ml per each litre of two-cycle oil.
MILITEC-1 SPECIFICATIONS
| 1. Flash point ASTM (D92) | 410oF/210oC |
| 2. Pour point ASTM (D97) | -45oF/-42oC |
| 3. Autoignition Temperature ASTM (D2155) | 715oF/380oC |
| 4. Cloud Point ASTM (D2500) | -25oF/-32oC |
| 5. Fire Point ASTM (D92) | 455oF/235oC |
| 6. Precipitation Number ASTM (D91) | 0.00 |
| 7. Rust Prevention Procedure ASTM (D-665) | Pass |
| 8. Kinematic Viscosity ASTM (D445) | |
| a. Viscosity @ 100oF/38oC cst | 43.41 | | b. Viscosity @ 104oF/40oC cst | 39.03 | | c. Viscosity @ 210oF/99oC cst | 5.80 | | d. Viscosity @ 212oF/100oC cst | 5.63 |
NOTE: It is important to document (written test results) MILITEC-1 treated and un-treated equipment to verify the testing baseline and the initial benefits of MILITEC-1 and the long-term benefits over time. Test conditions: temperature (oil, water, cylinder head, exhaust, etc.), noise, RPM’s (load, no-load vs. horsepower, MPH) vibration, wear metals, fuel and electrical consumption are the testing baseline. For additional heat readings, use a digital heat gun to verify temperature readings for all areas of the treated mechanical components (top, bottom, sides, etc.) Application, frequency, and ratios can be timed accordingly.
|
|
